升降平臺被廣泛使用的最主要原因之一是它具有良好的升降性能，適用廣泛，運動平穩。升降平臺設計時首先要確定主機參數；然后設計液壓系統；再就是設計控制部分。在這三個步驟中，最主要的是液壓系統的設計，液壓系統是升降機的關鍵部分，主機則通過升降機工作部件進行大致的估算。
Ningbo, one of the major lifting platform is widely used is that it has good lift performance for a wide, smooth motion. Ningbo lifting platform must first determine the design parameters of the host; then the design of the hydraulic system; then design a control section. In these three steps, the most important is the design of the hydraulic system, hydraulic system is a key part of the lift, lift the host through a rough estimate of working parts.

升降平臺液壓系統在設計時應著重注意的幾項：動力源，執行元件，控制元件，輔助元件。控制元件主要的是設計控制電路圖，屬于附加部分。在設計時，可以參照液壓車的設計原理，可以通過液壓車的設計標準對全液壓升降機進行合理化設計，減少在設計中不必要的失誤。
Ningbo lifting platform hydraulic system design should focus on several: power source, actuators, control components and auxiliary components. The main control element is to design a control circuit diagram, are additional parts. At design time, you can refer hydraulic car design principles, you can drive the hydraulic design criteria to rationalize the design of hydraulic lifts, reduce unnecessary mistakes in the design.